Archive for category Saving Historic Architecture
Your hands were blistered, your head dripping with sweat. It had taken a day, or two, maybe three, to create something you now hold in your hand to secure your short-term job-site future. You likely thought about its design and function in your head as long as it took to cut and weld it together with the best steel or iron you could find. A chisel. Not just any chisel, a stonemasons chisel.
Your chisel – its size, and weight to fit your hand – an extension of yourself. Made for the specific work you were paid to perform. Created for a specific type of stone. The chisel shape, length, and sharpness all part of its design and intended purpose to birth a dimension stone of specified measurements and texture worthy of setting into a historic masonry wall. To become an important part of another historic stone masonry building of load bearing capacity, carrying the weight of each consecutive floor upon itself as it raises from the ground on the stout foundation we never see or appreciate.
The creation of stone chisels at the construction site by the very stonemasons that use them is centuries old. And it probably is most definitely on the road to oblivion. The art of the stone masonry craft is now changed. Making tools at the construction site, or in the stonemasons workshop, was part of the trade. It was what you were trained to do 100 years ago. There were no other options. And for good reason, no one else would know what you needed for a specific project as each individual set of chisels were designed specifically for each job. If you have the privileged of knowing a retired stonemason – just look in his tool bag and confirm for yourself – there are many many chisels of various sorts.
Stone chisels; however, now are made by others. People that are not in the stone masonry trade. They can not appreciate the purpose of the chisel design or its intended purpose because they are not stonemasons.
Blame it on changes in architectural design: Veneer walls and thin stucco stone are in, old-fashion load-bearing walls are out. Blame it on changes in the father-son connection: handing down the trade skills to the next generation. Blame it on the fact that nothing lasts forever, not even tool making skills of the simple chisel lodged in the brain of almost every American stonemason over 80.
True American-made stone masonry chisels can not be found at Home Depot, Lowes, Menards or your local hardware stores. But don’t blame these companies they serve a different customer base – the “Do-it-Yourselfer.”
As a professional in your trade, part of your job is to research and look for those American companies that still do exist that make the custom tools you need – especially the all important chisel.
I have known Norm Akley, President of Trow & Holden Company, Inc., for nearly 20 years. He operates a company located in Barre, Vermont that makes old fashioned hand-made stone chisels among other items for the trade. Norm understands my trade and the challenges I face in difficult projects. I draw a picture of a special chisel design I need to have fabricated for a particular project to match a historic profile finish and fax it over to him, yes I said fax!
He makes the chisel from my sketch in the correct size and weight and the rest is history! Speaking of history, Trow & Holden Company has been making stoneworking tools since 1890.
Every chance I get I try to support American companies like Trow & Holden. The experience in tool making, as well as the companies appreciation and knowledge of my stone masonry trade, make Norm and his company a very valuable partner in our ability to offer the best Historic Stone Masonry Training Programs in the United States. In the end, I believe better workmanship is a direct result of better tools in the hands of craftspeople who know how to use them correctly.
An Interview with Lauren McCroskey, U.S. Army Corps of Engineers – Revised UFGS Historic Masonry Specification
I had the unique privilege to interview one of the leading historic preservation experts, Lauren McCroskey, Program Manager, for the U.S. Army Corps of Engineers, at the Seattle District, on the recent revision to the UFGS for the Restoration and Cleaning of Masonry in Historic Structures.
USACE Official Announcement:
Technical Center of Expertise (TCX), Preservation of Historic Structures and Buildings Technology Update
As part of its mission to provide leadership in historic buildings technology, the TCX announces a major revision of its specification, “Restoration and Cleaning of Masonry in Historic Structures.” The spec now reflects state-of-the-industry guidance for the treatment of historic masonry and mortar, and surpasses existing preservation guidance provided by other federal agencies.
Property managers and cultural resource specialists are encouraged to use the spec in contract documents to ensure that masonry work is performed appropriately to prolong the life of historic buildings. See Unified Facilities Guide Specification 04 01 00.91
Speweik: What is the official title of the specification?
McCroskey: The title is the UNIFIED FACILITIES GUIDE SPECIFICATIONS
DIVISION 04 – MASONRY SECTION 04 01 00.91
RESTORATION AND CLEANING OF MASONRY IN HISTORIC STRUCTURES
Speweik: Who originally authored it?
McCroskey: The Corps was the preparing agent and performed the processing. The exact author(s) are unknown, though Corps staff would have prepared it.
Speweik: How long has it been in use/circulation?
McCroskey: It’s been available since 1991.
Speweik: Who is authorized to use it?
McCroskey: The Guide is to be used by the Military Departments (Army, Navy, Air Force, etc.), the Defense Agencies and the DoD Field Activities for planning, design, construction, sustainment, restoration and modernization of facilities, regardless of funding source. But anyone can use the guide to adapt to a particular masonry project.
Speweik: What government agency owns it?
McCroskey: The Architectural Discipline Working Group are the owners of the Section; Scott Wick is the Corps representative of that group.
Speweik: What is your position with the USACE and what specific responsibilities do you have regarding historic preservation?
McCroskey: I manage the Technical Center of Expertise for the Preservation of Historic Structures and Buildings, a program of nationwide service. The program provides technical assistance and preservation planning for Corps Districts, DoD, and other federal agencies to ensure facility and property managers apply the best practices to historic structures. We try to set the highest standards of preservation practice through quality project work, training, and by developing technical information.
Speweik: What prompted you to request an update to the Historic Masonry Division Section this past year?
McCroskey: For several years I’ve had an awareness that the Corps’ existing standards and guidance for the treatment of historic masonry has lagged behind newer developments and technological advancements for treating historic brick, stone, and mortar. I receive inquiries from Corps Districts and other agencies asking for specific guidance to address deteriorated stone or brick. Property managers rarely know how to approach these issues from a historic preservation perspective, and often have maintenance and field crews tackle masonry problems. While their intent is good, the methods, materials, and applications are often not appropriate for historic structures, and can lead to further harm and long-term costly repairs. That’s why it’s essential for us to be able to pass along the most appropriate, state-of-the-industry techniques and standards.
Speweik: What do you believe to be one of the most significant changes to the specification?
McCroskey: There are many improvements, but one of the most important is the depth of information, which is far more educational for the user than the old spec. There is much to be learned from this document. Another key improvement is that materials application is not just described, but preceded by a thoughtful examination of building and masonry conditions. There is extensive information about how to investigate existing conditions so that the best decisions can be made about materials, conditions, and methods.
Speweik: How do you see this change making a positive difference for the quality-level of Historic Preservation Projects in the United States?
McCroskey: I believe the TCX is obligated to provide the best guidance regarding the treatment of historic structures and buildings. By encouraging the use of this guide, the rehabilitation of historic masonry should be performed in a manner that is appropriate, efficient, and prolongs the life of historic materials.
Speweik: How do you envision the revised specification affecting the work you do at the USACE?
McCroskey: The spec will be the only guidance we provide to customers, or when advising others on the best standards for masonry. Since this spec now surpasses all other historic masonry guidance, we now consider this document the “gold standard.” Of course, there are sub categories of masonry, such as terra cotta and concrete, which may require other technical information. But where brick, stone, and mortar are concerned, this is our “go to” standard.
Speweik: Did you consider the possible additional costs to Historic Preservation Projects as a result of some of the changes? And, if so, do you believe the additional cost is a significant percentage of overall project costs?
McCroskey: When good preservation practices are used, the life and performance of historic materials is extended. When improper practices are applied, greater costs can be incurred when the wrong treatment or method causes damage that requires repair. Taking short cuts by using commercial products that are not suited to historic stone or brick, or using techniques that are not consistent with historic methods can cost more long-term, and rarely satisfy the Secretary of the Interior’s Standards for Rehabilitation and treatment of historic structures that all federal agencies must follow.
Speweik: How do architects, owners, consultants and contractors find out more about this important specification document?
McCroskey: The guide is now available on-line at the TCX web page: http://www.nws.usace.army.mil/BusinessWithUs/HistoricPreservation.aspx
For additional information or clarification regarding the spec’s application, your readers may contact me at:
Technical Center of Expertise
Preservation of Historic Structures & Buildings
U.S. Army Corps of Engineers